My Telegram

Style of the artist: muchin

Update to v2!

Anima version here: Anima

V2 is an updated, rebuilt dataset.

99% of the dataset has been reworked, clarity has been improved, cropping is less aggressive, and it's updated. Artifacts from censoring have been almost completely removed, and the actual censorship in the dataset is no more than a few percent.

The goals remain the same: reducing the impact of blurry backgrounds (theoretically), reducing the impact of tanned skin, and stabilizing the color range and overexposure. The stylistic approach remains the same: removing all extraneous characters, including symbols, and excluding some motion lines.

The style is more modern, an attempt to streamline the old style (so I know which of the several approaches to style is the right one, lol). The approach with three quality categorizations remains, focusing on subjectively high-quality work. The lower the clarity, relevance, or quality, as well as subjective aspects, the lower the category. And the impact of each work in that category.

The training was conducted at 1536. The model has excellent detail, although there are some minor stability issues.

It's quite possible that some improvements will be made, especially in terms of signatures, but there will be no further fundamental alterations to the dataset.

All generations in the examples were done at 1536 x 1536 resolution, which is recommended for better detail.

Trigger word: @0tx1

Recommended weight: 0.7-0.9 (0.8)

Recommended words:

veiny belly

There are issues with the background. it is generally fine, but by default it's blurry background and photo background. Use these words in the negative. Also, if your skin seems too tan, try adding tan to the negative. The default negative that I would recommend use is:

worst quality, low quality, score_1, score_2, score_3, artist name, logo, adversarial noise, jpeg artifacts, censored, blurry background, tan, photo background

I will soon release new sdxl ver.

Illustrious/NAI XL

Trigger word: 0tx1

 Recommended weight: 0.7-1.3 (1.2)

Recommend cfg scale: 5-7 (5)

For all PDXL versions: Minimum recommended steps: 28 In general sfw sense style has little to no effect on anything, mainly on the eyes, on skin color, as well as in the case of for example ponyFaetality 3d takes more 2d stylistics, on the environment stylistic effect, especially not. Works with all source, if it's not a human sometimes a little lora weight reduction is recommended. Preferably not less than 0.55. Recommended to use adetailer, hiresfix. All images have a prompt you can look at and choose what you are interested in. v1.1 Animagine XL

Differences from v1:

• in the dataset a little less not original and a little more original style, as well as a little more censorship, in fact nothing has changed it's just a version for sdxl.

Trigger word: fmuc Recommended weight: 0.9-1.2 (1) for the original style maybe 1.1

Version has much more stability issues especially in terms of nsfw. Training on Animagine XL v3.1 v1.0 PDXL

Differences from 0.94:

• Almost all the censorship is removed, as is the comic book style.

• The smegma tag would theoretically work a little more consistently and better.

Trigger word: mainmuchinponyv1 or 0tx1 You can also try: fmuc for 2d

Explanation: I was told that the style in v1 is not original enough, well the request is fulfilled I made a broken version, which is nevertheless closer to the original than v1. Exactly because it's broken, that's what the trigger words are here: 0tx1, mainmuchinponyv1, supmuchinponyv1, lowsupmuchinponyv1. And so, it's kind of like pony tags, the word kind of hits the right folder, BUT! It's not done intentionally, so it's basically meaningless, 0tx1 is the connecting word for all folders. I think 0xt1 is less oversaturated and over-lit, but only a bit. You can try to get the old muchin style out of lowsupmuchinponyv1, but I can only wish you luck, it's not designed for that and it's also very similar to another trigger word, you can find comparisons between them the point is that mainmuchinponyv1 is already the largest folder and also the most trained given the increased number of steps, so in most cases it's enough, but maybe in narrow scenarios it can only get in the way. 0tx1 has roughly the same effect, I haven't tested much you can compare it yourself, maybe it gives more dataset coverage, but that's not certain. THE VERSION TAKEN IS INTENTIONALLY NOT OVERCOOKED. So, you are bound to use at least some trigger word unlike v0.94. If you want the style to affect less, it's better to just use the v1 version instead of not activating the trigger word. Nevertheless, there are different options in the example images. And yes, for some reason the word fmuc (maybe because of the muc in it) affects the style a bit, making it more 2d, you can see the comparison for yourself, I don't have time to experiment, but given the size of the trigger words maybe by letter you will find a better performance or combinations of trigger words will give you an unusual effect, I don't know. The word recommendations for v1 are generally still valid, although some of them make less sense. This version has the same problems as 0.94 with skin color, background blurring, overlighting, although of course for those who are used to 0.94 is a plus, yes, I believe that you will lose nothing but censorship and characters if you start using it instead of 0.94, but instead of v1 only if you really lack the original style. It is also possible that the trigger word is too concentrated on one type of character, that is, if you do not specify anything in the girl, she will have said the same hair color almost always.

Recommended weight for original style: 1-1.1 (1)

If you are going to use this style as an additional style, I recommend looking at the more flexible version v1

Recommended negative prompt words if you want more default generations: bar censor, mosaic censoring, tan, oversaturated, yellow skin, blurry background, greyscale, monochrome, 3d Non-obvious points: If you use xyz in local web ui, there may be problems with prompt s/r, so put in any word like fmuc and only then say 0tx1, otherwise it will find that text at the lora file and break the lora work. V1 PDXL

Differences from 0.94:

• Almost all the censorship is removed, as is the comic book style.

• The smegma tag would theoretically work a little more consistently and better.

• More flexibility including weight.

• The background is more often unblurred now.

Trigger word: fmuc

Recommended weight: 0.6-1 (0.85) for the original style 0.9-1

Prompt recommendations:

Recommended words for muchin original style: score_7, anime screencap, flat colors

For muchin style sex: 2girls sex, futanari fuck girl, futa with female, cum, penis shaped stomach bulge

Also: brown penis, dark veiny testicles

For face style: chestnut mouth, serafuku, blush

Also: sanpaku, upturned eyes

These words may also be useful: cum overflow, muscular, motion lines, motion blur, trembling, x-ray

Recommended negative prompt if you want less yellow skin: tan, oversaturated, yellow skin

Possible problems/Non-obvious points: By default, the more lora weight, the more muscular the characters will become. Without negative tags greyscale and monochrome lora likes to produce such images. The heavier the lora weight, the closer to the original style, which means the skin color will yellow out. Maybe in special cases in the background will be divorces on the texture of objects, you can in this case reduce the weight of lora or specify for example the depth of field, although it is difficult to get such a thing. Thanks for your activity, it was the main motivation to improve lora. I left the trembling effect, so it can be annoying, but removed all other visual comic effects and censorship. Also, I noticed how many people liked smegma, so I upped it priority a bit. This is the last update for a while, though lora may still be tweaked a bit, including a special facial expression option. But overall lora is ready and stable, the dataset has been diluted a bit, so the original style is a bit lost, but it's still very close. My tests have shown that there is no point in a 1.0 version, as I sometimes do. Also theoretically the style knows all the right characters, and also theoretically the variation of men has gotten a bit bigger, maybe variants of extreme concepts have become easier to implement, but I haven't tested. v0.94 PDXL The description below is divided into 2 variants, a generic short sfw variant, and below a detailed nsfw variant. General style recommendations: Trigger word: fmuc (upd. doesn't seem to be working, details below.) Recommended weight: 0.7-0.9 (0.75) for the original style with artifacts up to 1.2 Works fine with most pony checkpoints,

Detailed style guidelines: From a nsfw perspective style affects many different aspects, I'll start with the positives. The genital style is similar to the original. The faces also have more emotion, in terms of ahegao. Also the sex scenes are accompanied by visual effects. More specifically: The pleasure effect on the face is enhanced, I recommend trying ahegao, fucked silly, mind break. Although the effect will also be just like that. Tense lustful face excellent fit.

 Use appropriate positive and negative words, here is my version of negative prompt: score_4, watermark, signature, greyscale, monochrome, (bar censor, censored pussy, comic, blurry background, pointless censoring, censored, mosaic censoring, speech bubble, black lines:1.1), convenient censoring, heart censor, oversaturated, english text, username, 3d Recommended negative prompt if you want only less censorship: (bar censor:1.2), (censored pussy, comic, blurry background, pointless censoring, censored, mosaic censoring, speech bubble, black lines:1.1), convenient censoring, heart censor